Using xref (external reference) on ProgeCAD

Xref, which stands for External Reference is the command to use external sources to the drawing. By using external sources, the process of drawing will take less time because it no longer draw all sections. This is needed much when using a section that is similar to many drawing.

to use the command X-ref, please go directly to the Insert menu and choose Xref Manager as shown in the figure below.

 Select an external image to be used and insert …..

Source of external drawing that is used contains the name “VMANCER”, but if eliminated (VMANCER name on the source) will also affect the image that uses the external source.

Name “VMANCER” is also missing in the drawing that uses an external source as shown in the figure below.

A more complete video of this can be seen below.

One Response to “Using xref (external reference) on ProgeCAD”

1. IntelliCAD says:

   01/10/2010 at 6:47 PM

   Get a free 30 day trial of progeCAD progefessional at our website, progeCAD USA

   Reply